EN

Axe Enchant Order

This axe enchant order is the cheapest way to combine Sharpness V, Fortune III, Efficiency V, Unbreaking III, Mending on an axe: 32 levels in 5 anvil steps, with no step above 11.

Repair & Name

32

32 levels in 5 steps · 462 XP points

Most expensive step: 11 levels. The bar fills at the 40-level limit.

  1. 1
    plusgives

    Enchantment Cost: 6

    Put the Netherite Axe left and the book (Fortune III) right.

  2. 2
    plusgives

    Enchantment Cost: 3

    Put the book (Efficiency V) left and the book (Unbreaking III) right.

  3. 3
    plusgives

    Enchantment Cost: 10

    Put the Netherite Axe (Fortune III) left and the book (Efficiency V + Unbreaking III) right.

  4. 4
    plusgives

    Enchantment Cost: 2

    Put the book (Sharpness V) left and the book (Mending) right.

  5. 5
    plusgives

    Enchantment Cost: 11

    Put the Netherite Axe (Fortune III + Efficiency V + Unbreaking III) left and the book (Sharpness V + Mending) right.

The order in words

Get all 5 books ready before you start, and keep at least 11 levels on hand. Then follow these steps on an anvil:

  • Step 1: Put the axe in the left slot and the Fortune III book in the right. Neither side has been on an anvil yet, so you only pay for the enchantments: 6 levels.
  • Step 2: Merge the Efficiency V book with the Unbreaking III book, the first one on the left. Neither side has been on an anvil yet, so you only pay for the enchantments: 3 levels.
  • Step 3: Put the axe (now with Fortune III) in the left slot and the Efficiency V + Unbreaking III book in the right. You pay 8 levels for the enchantments plus 2 for prior work, so 10 in total.
  • Step 4: Merge the Sharpness V book with the Mending book, the first one on the left. Neither side has been on an anvil yet, so you only pay for the enchantments: 2 levels.
  • Step 5: Put the axe (now with Fortune III + Efficiency V + Unbreaking III) in the left slot and the Sharpness V + Mending book in the right. You pay 7 levels for the enchantments plus 4 for prior work, so 11 in total. That finishes the axe.

Why this order is the cheapest

Each repair or enchantment combination increases prior work. Rename-only operations do not. So the order keeps the penalties low by merging books with each other in pairs. With 5 books, the axe needs at least 3 rounds on the anvil, and this order uses exactly that many.

The first step puts Fortune III straight on the axe for 6 levels. It is the dearest book in the build, so it goes on while the item has no penalty at all. The expensive books, Fortune III and Sharpness V, cost 6 and 5 levels on their own, so the order adds them while their penalty is still low. Cheap books like Mending can ride along later, when the penalty has grown.

Fortune III goes on the bare axe first, because it is the dearest book. Efficiency and Unbreaking join as one book, and Sharpness pairs with Mending for the final step.

A Silk Touch book costs 4 levels on a fresh axe, against 6 for Fortune III. So the Silk Touch axe below comes out a little cheaper than the max build.

Levels and experience

The full order costs 32 levels. If you do each step as soon as you have its levels, you spend about 462 experience points. Saving up to level 32 first would take 1628 points, because each level costs more XP the higher you climb. So enchant in small batches and keep your levels low. The XP calculator converts any level into points.

After the last step the axe has been on the anvil 3 times. Its prior work penalty is now 7, so a later repair or rename starts at that cost. Check a single step with the prior work penalty calculator.

If you skip a book

You don't need every book on day one. Leaving out Fortune III saves the most: the rest costs 22 levels instead of 32.

No Mending yet? Enchant the rest now for 27 levels, then add Mending later for 9 more. That is 36 levels in all, against 32 if you wait and do it in one go. The extra cost is small, so using the item early is usually worth it.

Book left outTotal for the restLevels saved
Sharpness V239
Fortune III2210
Efficiency V239
Unbreaking III257
Mending275

If your axe was on an anvil before

A used axe costs more, because the anvil adds its prior work penalty to every step it is in:

Earlier anvil usesCheapest totalSurvival?
None (fresh)32 levelsYes
139 levelsYes
246 levelsYes
357 levelsYes

Many players start from an axe that already has Unbreaking III from the enchanting table. In that case the other 4 books cost 25 levels in 4 steps, because a table enchant adds no prior work penalty.

Enter your own item's enchantments and uses in the calculator.

Java and Bedrock costs

Bedrock charges only the levels an enchantment gains. So if your axe already has Sharpness IV, adding a Sharpness V book costs 1 level here. Java charges the full resulting level, so the same step costs 5 there. Merging two Sharpness IV books into one V costs 1 in Bedrock and 5 in Java.

For a fresh axe with one book per enchantment, no enchantment gains a level twice, so both rules give the same step costs. Bedrock also charges nothing for a clashing enchantment on a book, while Java adds 1 level for each.

The books in this order

Sharpness V, Fortune III, Efficiency V, Unbreaking III, Mending. Not sure which books to get? The best axe enchantments page explains each one and where to find it. If the anvil refuses a step, read Too Expensive! for the fixes. The anvil guide covers repairs and renaming.

Other builds

Netherite AxeSharpness VSilk TouchEfficiency VUnbreaking IIIMending

Silk Touch: Sharpness V, Silk Touch, Efficiency V, Unbreaking III, Mending. 30 levels in 5 steps, 2 fewer than the max build. See the order in the calculator.

Questions

What is the best enchant order for an axe?

1. axe + book (Fortune III): 6 levels; 2. book (Efficiency V) + book (Unbreaking III): 3 levels; 3. axe + book (Efficiency V + Unbreaking III): 10 levels; 4. book (Sharpness V) + book (Mending): 2 levels; 5. axe + book (Sharpness V + Mending): 11 levels. Total: 32 levels.

Why is my axe too expensive?

Each anvil use raises the item's prior work penalty (0, 1, 3, 7, 15, 31…). An axe that has already gone through the anvil several times, for combining or repairs, reaches the 40-level limit quickly. Combine the books with each other first, then put the finished book on the axe in as few steps as possible.

Do I need all the books at the same level?

Use books at the final level you want. Two books of the same level merge into the next level (two Sharpness IV make Sharpness V), but that costs an extra anvil step.

How many levels do I need for a max axe?

32 levels in total, spread over 5 steps. The dearest step costs 11, so you never need more than 11 levels at once.

Can I add Mending to my axe later?

Yes. Enchant the rest first for 27 levels, then add Mending for 9 more. That is 36 levels in all, against 32 if you wait and do everything at once.

Does Sharpness go on an axe before Efficiency?

It doesn't matter for the result. For the cost, the cheapest order adds Sharpness late, paired with Mending.